用途:

本機用于擠制胎面，內胎，墊帶，膠管等橡膠半成品。

USE:

The machine is used for the extrusion of half-finished rubber products such as tire tread,inner tube,rim band and rubber tube.

結構特點:

1 本機可分別配置內胎，胎面或者根據用戶需要配置其他機頭。
2 機身沒有測溫和溫度顯示裝置;直徑150以上喂料段裝有旁壓輥以增加喂料能力。
3 螺桿和襯套均經過氮化處理，具有足夠的強度和耐磨性。
4 減速機配有強制潤滑裝置，具有傳動效率高，使用壽命長，噪音小等優點。
5 直徑150以上機型配有變頻調速電機。
6 喂料輥為側開式結構，便于清膠。

Structural:

1 The machine is equipped with inner tube and tire tread extrusion heads ,and can also be equipped with other extrusion heads as required by users.
2 A machine body temperature measuring and indicating device is installed.The feeding zone over 150 is equipped with side rolls for the enhancement of feeding capability.
3 The screws and bushes are subjected to nitrogenation treatment to get enough strength and wear-resistance.
4 The reducer has a forced lubrication unti,which is featured by high transmission efficiency,long service life and low noise.
5 The machine over 150 is driven by a variable-speed motor.
6 The side rolls are designed as side-open type for easy rubber removal.